Products categories
1. Product Features of 150x150mm CCT Dimmable LED Panel Light.
•This good quality and low cost led panel downlight series is a good option for commercial down-light project in tight budgets.
•The lightweight construction design make the housing weight very small which can save cost of the housing, but achieve very high performance in heat dissipation.
•High efficient SMD2835 with 80lm/w, which save much electricity. Uniform light create pleasant atmosphere.
•The reasonable layout of the chip make the even distribution luminescence, 100% no dark areas, using smd2835 chip with high brightness and low decay. Super long lifespan make sure the light last shining.
•CCT square led panel light 150mm adopts integrated aluminum radiator with strong convection design. It perfectly solve the heat dissipation problem, and make the lamp lifespan longer.
2. Product Specification:
Model No |
DPL-S4-7W-CCT |
DPL-S5-9W-CCT |
DPL-S6-12W-CCT |
DPL-S7-14W-CCT |
DPL-S9-20W-CCT |
Power Consumption |
7W |
9W |
12W |
14W |
20W |
Dimension (mm) |
85x85mm |
120x120mm |
150x150mm |
170x170mm |
225x225mm |
Luminous Flux (Lm) |
490~560lm |
630~720lm |
840~960lm |
980~1120lm |
1400~1600lm |
LED Qty (pcs) |
30pcs |
72pcs |
94pcs |
108pcs |
152pcs |
LED Type |
SMD2835 |
||||
Color Temperature (K) |
Dimmable from 3000K to 6500K |
||||
Input Voltage |
AC 85V - 265V, 50 - 60Hz |
||||
Beam Angle (degree) |
>120° |
||||
Light Efficiency (lm/w) |
>80lm/w |
||||
CRI |
>80 |
||||
LED Driver |
Constant Current IC Driver |
||||
Working Environment |
Indoor |
||||
Material of Body |
Aluminum Alloy + Mitsubishi LGP + PS Diffuser |
||||
IP Rating |
IP20 |
||||
Operating Temperature |
-20°~65° |
||||
Dimmable Way |
Color temperature and brightness dimmable |
||||
Installation Option |
Recessed |
||||
Life span |
50,000hours |
||||
Warranty |
3 Years |
3.LED Panel Light Pictures:
CCT Dimmable Controller:
1.Within 3 seconds after the lamp is lit up, press the number key "1", then press the "ID" key, then press the number key "1" again and press the "ID" key again as the first time. If the code is matched successfully, then the light will flash one time;
2. If you want to set the second light or second group lights, you can press the number key "2", then press the "ID" key, then press the number key "2" again and press the "ID" key again as the same. This is to set the group number for the corresponding panel lights;
3.When you want to control the number "1" light or number "1" group lights, just press the "1" number key to adjust the brightness or color temperature;
4. Application:
Great applications for living rooms, bedrooms, bathrooms, kitchens, dining rooms, home offices, corridors, utility/laundry rooms, show rooms, hallways, porches, garages, and more. Safe and easy to install, just wire into mains. No warm up time required, no noise and no flickering, no IR and UV radiation.
Installation Guide:
1.First of all, cut off the power switch.
2.Open a hole on the ceiling as required size.
3.Connect power supply and AC circuit for the lamp.
4.Stuff the lamp into the hole, finish installation.
Subway Lighting (China)
Company Lighting (Belgium)
Sport Shop Lighting (UK)
Factory Lighting (Belgium)