Products categories
1. Product Features of 225mm CCT Tunable white LED Panel Light.
•The light guide plate can evenly diffuse the light and dissipate the heat. The light transmittance can be up to 90%. It is resistible to high pressure, high temperature, erosion and distortion.
•The cooling pad at the back of the panel is pure aluminum which can effectively dissipate the heat and guarantee the lifespan of the LED chips.
•By using the international famous LED as the lighting source, all of our lamps are of high light efficiency, low light loss factor and long lifespan.
•The high-quality aluminum frame has been oxidized and surface drawing. So it is endurable and compact, which can tightly fasten the frame.
•Round CCT dimming led panel light has passed CE certification etc. and it has 3 years warranty.
2. Product Specification:
Model No |
DPL-R9-20W-CCT |
Power Consumption |
20W |
Dimension (mm) |
Ф225mm |
Luminous Flux (Lm) |
1400~1600lm |
LED Qty (pcs) |
132pcs |
LED Type |
SMD2835 |
Color Temperature (K) |
Dimmable from 3000K to 6500K |
Input Voltage |
AC 85V - 265V, 50 - 60Hz |
Beam Angle (degree) |
>120° |
Light Efficiency (lm/w) |
>80lm/w |
CRI |
>80 |
LED Driver |
Constant Current IC Driver |
Working Environment |
Indoor |
Material of Body |
Aluminum Alloy + Mitsubishi LGP + PS Diffuser |
IP Rating |
IP20 |
Operating Temperature |
-20°~65° |
Dimmable Way |
Color temperature and brightness dimmable |
Installation Option |
Recessed |
Life span |
50,000hours |
Warranty |
3 Years |
3.LED Panel Light Pictures:
CCT Dimmable Controller:
1.Within 3 seconds after the lamp is lit up, press the number key "1", then press the "ID" key, then press the number key "1" again and press the "ID" key again as the first time. If the code is matched successfully, then the light will flash one time;
2. If you want to set the second light or second group lights, you can press the number key "2", then press the "ID" key, then press the number key "2" again and press the "ID" key again as the same. This is to set the group number for the corresponding panel lights;
3.When you want to control the number "1" light or number "1" group lights, just press the "1" number key to adjust the brightness or color temperature;
4. Application:
Round led panel light is widely used for bathroom lighting, corridor lighting, kitchen lighting, balcony lighting, living rooms lighting, bedrooms lighting, dining rooms lighting, KTV lighting etc.
Installation Guide:
1.First of all, cut off the power switch.
2.Open a hole on the ceiling as required size.
3.Connect power supply and AC circuit for the lamp.
4.Stuff the lamp into the hole, finish installation.
Office Lighting (Belgium)
Pastry Shop Lighting (Milan)
Home Lighting (Italy)
Hotel Lighting (Australia)