Products categories
1. Product Features of 300x300 CCT Dimmable LED Panel Light.
•High reliable constant current driving guarantees longer life span of the lamp beads.
•Super Energy-saving and lower power consumption, saving up to 40-50% compared to traditional fluorescent lamp and 80% to traditional incandescent lamp on the condition of same illumination.
•Environment friendly, no flashing, no UV or infrared radiation, lower heat radiation, mercury free, no polluting materials in the process of using.
•CCT led panel light 295x295mm has more than 50,000 hours life span by normal use, ten times to traditional incandescent lamp.
•The high-quality aluminum frame has been oxidized and surface drawing. So it is endurable and compact, which can tightly fasten the frame.
2. Product Specification:
Model No |
PL-30120-60W-CCT |
PL-60120-60W-CCT |
PL-3030-25W-CCT |
Power Consumption |
60W |
60W |
25W |
Luminous Flux (Lm) |
4800~5400lm |
4800~5400lm |
2000~2250lm |
Dimension (mm) |
295*1195*10mm |
595*1195*10mm |
295*295*10mm |
LED Qty (pcs) |
240pcs |
240pcs |
210pcs |
LED Type |
SMD 2835 |
||
Color Temperature (K) |
Dimmable from 3000K to 6500K |
||
Color |
Warm White/Natural White/Pure White |
||
Beam Angle (degree) |
>120° |
||
Light Efficiency (lm/w) |
>90lm/w |
||
CRI |
>80 |
||
LED Driver |
Constant Current IC Driver |
||
Power Factor |
>0.9 |
||
Input Voltage |
AC 85V - 265V, 50 - 60Hz |
||
Working Environment |
Indoor |
||
Material of Body |
Aluminum Frame + Mitsubishi LGP + PS Diffuser |
||
IP Rating |
IP20 |
||
Operating Temperature |
-20°~65° |
||
Dimmable Way |
Color temperature and brightness dimmable |
||
Installation Option |
Ceiling Recessed/ Suspended/ Surface/ Wall Mount |
||
Life span |
50,000hours |
||
Warranty |
3Years |
3.LED Panel Light Pictures:
CCT Dimmable Controller:
1.Within 3 seconds after the lamp is lit up, press the number key "1", then press the "ID" key, then press the number key "1" again and press the "ID" key again as the first time. If the code is matched successfully, then the light will flash one time;
2. If you want to set the second light or second group lights, you can press the number key "2", then press the "ID" key, then press the number key "2" again and press the "ID" key again as the same. This is to set the group number for the corresponding panel lights;
3.When you want to control the number "1" light or number "1" group lights, just press the "1" number key to adjust the brightness or color temperature;
4. Application:
CCT adjustable led panel light fixtures are widely used for Residential, Living room; Kichen; Bedroom, etc. It also can be widely used in commercial light, office , meeting room, led ceiling room, etc
Recessed Installation Project:
Surface Mounted Installation Project:
Suspended Installation Project:
Wall Mounted Installation Project:
Installation Guide:
For led panel light, there are ceiling recessed, surface mounted, suspended installation, wall mounted etc installation ways for options with corresponding installation accessories. Customer can choose according to their requirements.
Suspension Kit:
The suspended mount kit for LED panel allows panels to be suspended for a more elegant look or where there is no traditional T-bar grid ceiling present.
Items included in the Suspended Mount Kit:
Items |
PL-SCK4 |
PL-SCK6 |
||||
3030 |
3060 |
6060 |
6262 |
3012 |
6012 |
|
X 2 |
X 3 |
|||||
X 2 |
X 3 |
|||||
X 2 |
X 3 |
|||||
X 2 |
X 3 |
|||||
X 4 |
X 6 |
Surface Mount Frame Kit:
This surface mount frame is perfect to install Lightman LED panel lights in locations without suspended ceiling grid, such as the plasterboard or concrete ceilings. It is ideal for offices, schools, hospitals etc. where recessed mounting is not possible.
First screw the three frame sides to the ceiling. The LED panel is then slid in. At last complete the installation by screwing the remaining side.
The surface mount frame has enough depth to accommodate the LED driver, which should be placed in the centre of the panel to get good heat dissipation.
Items included in the Surface Mount Frame Kit:
Items |
PL-SMK3030 |
PL-SMK6030 |
PL-SMK6060 |
PL-SMK6262 |
PL-SMK1230 |
PL-SMK1260 |
|
Frame Dimension |
302x305x50 mm |
302x605x50 mm |
602x605x50 mm |
622x625x50mm |
1202x305x50mm |
1202x605x50mm |
|
L302 mm |
L302mm |
L602 mm |
L622mm |
L1202mm |
L1202 mm |
||
L305 mm |
L305 mm |
L605mm |
L625 mm |
L305mm |
L605mm |
||
X 8 pcs |
|||||||
X 4 pcs |
X 6 pcs |
Ceiling Mount Kit:
The ceiling mount kit is specially designed, the other way to install SGSLight TLP LED panel lights in locations without suspended ceiling grid, such as the plasterboard or concrete ceilings or wall. It is ideal for offices, schools, hospitals etc. where recessed mounting is not possible.
First screw the clips to the ceiling / wall, and the corresponding clips to the LED panel. Then couple the clips . At last complete the installation by placing the LED driver at the back of the LED panel.
Items included in the Ceiling Mount Kits:
Items |
PL-SMC4 |
PL-SMC6 |
||||
3030 |
3060 |
6060 |
6262 |
3012 |
6012 |
|
X 4 |
X 6 |
|||||
X 4 |
X 6 |
|||||
X 4 |
X 6 |
|||||
X 4 |
X 6 |
|||||
X 4 |
X 6 |
|||||
X 4 |
X 6 |
|||||
X 4 |
X 6 |
Spring Clips:
The spring clips are used to install the LED panel in the plasterboard ceiling with cut hole. It is ideal for offices, schools, hospitals etc. where recessed mounting is not possible.
First screw the spring clips to the LED panel. The LED panel is then inserted into the cut hole of the ceiling. At last complete the installation by adjusting the position of the LED panel and make sure the installation is firm and safe.
Items included:
Items |
PL-RSC4 |
PL-RSC6 |
||||
3030 |
3060 |
6060 |
6262 |
3012 |
6012 |
|
X 4 |
X 6 |
|||||
X 4 |
X 6 |
Store Lighting (Belgium)
Classroom Lighting (UK)
Clinic Lighting (UK)
Apartment Lighting (USA)