Products categories
1.Product Introduction of 300x300 Zigbee RGB LED Panel Light 18w.
•No flash, No Glare, Ultraviolet. No strobe eliminate the visual fatigue caused by the stroboscopic of traditional light source.
•18W Panel Light with Self-protection system inside, which ensure the normal running in case of unstable voltage.
•RGB led light panel uses Epistar 5050, the temperature at 80 degrees, the led light decline of only about 3%. And we use leading thermal management structure, the cooling body wall thickness
of 3.0MM, low temperature rise, greatly increasing the life of the entire lamp.
•For ZigBee RGB led panel light fixture, there are 595x595, 295x595, 595x1195, 295x1195 and 620x620 for options.
2. Product Parameter:
Model No |
PL-60120-48W-RGB |
PL-3060-18W-RGB |
PL-3030-18W-RGB |
Power Consumption |
48W |
18W |
18W |
Dimension (mm) |
595*1195*11mm |
295*595*11mm |
295*295*11mm |
LED Qty (pcs) |
182pcs |
84pcs |
84pcs |
LED Type |
SMD5050 |
||
Color |
Multi Colors |
||
Beam Angle (degree) |
>120° |
||
CRI |
>80 |
||
LED Driver |
Constant Voltage LED Driver |
||
Output Voltage |
DC12-24V |
||
Input Voltage |
AC 85V - 265V, 50 - 60Hz |
||
Working Environment |
Indoor |
||
Material of Body |
Aluminum alloy frame and PS Diffuser |
||
IP Rating |
IP20 |
||
Operating Temperature |
-25°~70° |
||
Dimmable Way |
Zigbee RGB dimming |
||
Installation Option |
Recessed/Suspended/Surface Mounted |
||
Life span |
50,000hours |
||
Warranty |
3Years |
3.LED Panel Light Pictures:
4. LED Panel Light Application:
Lightman LED Panel Light Fixture is easy installed. It used in coffee shop, hotel, bar, restaurant, kitchen, club indoor lighting etc.
Installation Guide:
For led panel light, there are ceiling recessed, surface mounted, suspended installation, wall mounted etc installation ways for options with corresponding installation accessories. Customer can choose according to their requirements.
Suspension Kit:
The suspended mount kit for LED panel allows panels to be suspended for a more elegant look or where there is no traditional T-bar grid ceiling present.
Items included in the Suspended Mount Kit:
Items |
PL-SCK4 |
PL-SCK6 |
||||
3030 |
3060 |
6060 |
6262 |
3012 |
6012 |
|
X 2 |
X 3 |
|||||
X 2 |
X 3 |
|||||
X 2 |
X 3 |
|||||
X 2 |
X 3 |
|||||
X 4 |
X 6 |
Surface Mount Frame Kit:
This surface mount frame is perfect to install Lightman LED panel lights in locations without suspended ceiling grid, such as the plasterboard or concrete ceilings. It is ideal for offices, schools, hospitals etc. where recessed mounting is not possible.
First screw the three frame sides to the ceiling. The LED panel is then slid in. At last complete the installation by screwing the remaining side.
The surface mount frame has enough depth to accommodate the LED driver, which should be placed in the centre of the panel to get good heat dissipation.
Items included in the Surface Mount Frame Kit:
Items |
PL-SMK3030 |
PL-SMK6030 |
PL-SMK6060 |
PL-SMK6262 |
PL-SMK1230 |
PL-SMK1260 |
|
Frame Dimension |
302x305x50 mm |
302x605x50 mm |
602x605x50 mm |
622x625x50mm |
1202x305x50mm |
1202x605x50mm |
|
L302 mm |
L302mm |
L602 mm |
L622mm |
L1202mm |
L1202 mm |
||
L305 mm |
L305 mm |
L605mm |
L625 mm |
L305mm |
L605mm |
||
X 8 pcs |
|||||||
X 4 pcs |
X 6 pcs |
Ceiling Mount Kit:
The ceiling mount kit is specially designed, the other way to install SGSLight TLP LED panel lights in locations without suspended ceiling grid, such as the plasterboard or concrete ceilings or wall. It is ideal for offices, schools, hospitals etc. where recessed mounting is not possible.
First screw the clips to the ceiling / wall, and the corresponding clips to the LED panel. Then couple the clips . At last complete the installation by placing the LED driver at the back of the LED panel.
Items included in the Ceiling Mount Kits:
Items |
PL-SMC4 |
PL-SMC6 |
||||
3030 |
3060 |
6060 |
6262 |
3012 |
6012 |
|
X 4 |
X 6 |
|||||
X 4 |
X 6 |
|||||
X 4 |
X 6 |
|||||
X 4 |
X 6 |
|||||
X 4 |
X 6 |
|||||
X 4 |
X 6 |
|||||
X 4 |
X 6 |
Spring Clips:
The spring clips are used to install the LED panel in the plasterboard ceiling with cut hole. It is ideal for offices, schools, hospitals etc. where recessed mounting is not possible.
First screw the spring clips to the LED panel. The LED panel is then inserted into the cut hole of the ceiling. At last complete the installation by adjusting the position of the LED panel and make sure the installation is firm and safe.
Items included:
Items |
PL-RSC4 |
PL-RSC6 |
||||
3030 |
3060 |
6060 |
6262 |
3012 |
6012 |
|
X 4 |
X 6 |
|||||
X 4 |
X 6 |
Clothes Shop Lighting (China)
Bar Lighting (UK)
KTV Lighting (China)
Kitchen Lighting (UK)