36W 40W 595×595 Sound & Light Sensor LED Panel Light 600×600

The product design uses the special sensor to detect the sound change, causes the switch to turn on the load automatically, the switch carries on the time delay, the time delay end automatically closes the load.

Item: 600x600 Sound & Light Sensor LED Panel Light

Power: 36W /40W /48W /54W /60W /72W /80W

Input Voltage: AC85~265V / AC220V-240V, 50-60Hz

Color Temperature: Warm White, Natural White, Cool White

Lifespan: >50000 Hours

Send email to us Download as PDF

Products categories

Product Detail

Installation Guide

Project Case

Product Video

1.Product Introduction of Sound &Light Sensor Round LED Slim Panel Light.

• Energy saving, safety and convenience, make it become your ideal choice in the model intellectualized high-quality life.

• Ceiling type PIR sensor is new intellective product in science and technology after the emergence of the hand-control switch, the electronic touch switch the sound-control switch.

• Further only the lights in the direct vicinity of present will be activated allowing another areas to remain at maximum energy saving.

• Apply to the court, the passage, the corridor, the stairs, the depot, the bathroom, the toilet ,children room, and so on. Its the embodiment of real state management and building intellectualization.

• Long Lifespan 50,000hours and extremely low maintenance cost.

2. Product Parameter：

Model No	Power	Product Size	LED Qty	Lumens	Input Voltage	CRI	Warranty
DPL-R3-3W	3W	Ф85mm	15*SMD2835	>240Lm	AC85~265V 50/60HZ	>80	2 Years
DPL-S5-6W	6W	Ф120mm	30*SMD2835	>480Lm	AC85~265V 50/60HZ	>80	2 Years
DPL-S6-9W	9W	Ф145mm	45*SMD2835	>720Lm	AC85~265V 50/60HZ	>80	2 Years
DPL-S7-12W	12W	Ф170mm	55*SMD2835	>960Lm	AC85~265V 50/60HZ	>80	2 Years
DPL-S8-15W	15W	Ф200mm	70*SMD2835	>1200Lm	AC85~265V 50/60HZ	>80	2 Years
DPL-S9-18W	18W	Ф225mm	80*SMD2835	>1440Lm	AC85~265V 50/60HZ	>80	2 Years
DPL-S12-24W	24W	Ф300mm	120*SMD2835	>1920Lm	AC85~265V 50/60HZ	>80	2 Years

3.LED Panel Light Pictures:

4. sound light switch for led panel light

5. sound sensor switch for 60x60 led panel

4. LED Panel Light Application:

Apply to the court, the passage, the corridor, the stairs, the depot, the bathroom, the toilet ,children room, and so on. Its the embodiment of real state management and building intellectualization.

Recessed Installation Project:

7. recessed led panel installation example

Wall Mounted Installation Project:

10. wall mounted led panel installation example

Suspended Installation Project:

9. suspended led panel installation example

Surface Mounted Installation Project:

Previous: CE TUV 30×120 Microwave Sensor LED Flat Panel Light 600×1200

Next: Germany Sound &Light Sensor LED Ceiling Mounted Panel Light 62×62

Installation Guide:

For led panel light, there are ceiling recessed, surface mounted, suspended installation, wall mounted etc installation ways for options with corresponding installation accessories. Customer can choose according to their requirements.

Suspension Kit:

The suspended mount kit for LED panel allows panels to be suspended for a more elegant look or where there is no traditional T-bar grid ceiling present.

Items included in the Suspended Mount Kit:

Items	PL-SCK4				PL-SCK6
	3030	3060	6060	6262	3012	6012
	X 2				X 3
	X 2				X 3
	X 2				X 3
	X 2				X 3
	X 4				X 6

Surface Mount Frame Kit:

This surface mount frame is perfect to install Lightman LED panel lights in locations without suspended ceiling grid, such as the plasterboard or concrete ceilings. It is ideal for offices, schools, hospitals etc. where recessed mounting is not possible.

First screw the three frame sides to the ceiling. The LED panel is then slid in. At last complete the installation by screwing the remaining side.

The surface mount frame has enough depth to accommodate the LED driver, which should be placed in the centre of the panel to get good heat dissipation.

Items included in the Surface Mount Frame Kit:

Items	PL-SMK3030	PL-SMK6030	PL-SMK6060	PL-SMK6262	PL-SMK1230	PL-SMK1260
Frame Dimension	302x305x50 mm	302x605x50 mm	602x605x50 mm	622x625x50mm	1202x305x50mm	1202x605x50mm
Frame A	L302 mm X 2 pcs	L302mm X 2 pcs	L602 mm X 2 pcs	L622mm X 2 pcs	L1202mm X 2 pcs	L1202 mm X 2 pcs
Frame B	L305 mm X 2 pcs	L305 mm X 2 pcs	L605mm X 2 pcs	L625 mm X 2 pcs	L305mm X 2 pcs	L605mm X 2 pcs
	X 8 pcs
	X 4 pcs			X 6 pcs

Ceiling Mount Kit:

The ceiling mount kit is specially designed, the other way to install SGSLight TLP LED panel lights in locations without suspended ceiling grid, such as the plasterboard or concrete ceilings or wall. It is ideal for offices, schools, hospitals etc. where recessed mounting is not possible.

First screw the clips to the ceiling / wall, and the corresponding clips to the LED panel. Then couple the clips . At last complete the installation by placing the LED driver at the back of the LED panel.

Items included in the Ceiling Mount Kits:

Items	PL-SMC4				PL-SMC6
	3030	3060	6060	6262	3012	6012
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6

Spring Clips:

The spring clips are used to install the LED panel in the plasterboard ceiling with cut hole. It is ideal for offices, schools, hospitals etc. where recessed mounting is not possible.

First screw the spring clips to the LED panel. The LED panel is then inserted into the cut hole of the ceiling. At last complete the installation by adjusting the position of the LED panel and make sure the installation is firm and safe.

Items included: