Products categories
1. Product Features of 600x600 CCT Dimmable LED Panel Light.
•Lightman 3000K-6500K color temperature led panel lamp (CCT panel light) is a multi-functional LED lighting, remote control, color matching, temperature control light control lamps and lanterns system.
The utility model is matched with a wireless remote controller, a receiving controller and a LED lamp. Remote control ultra-thin design, out of light uniform, exquisite button type controller, highlight the noble.2.4G high frequency wireless remote control, with low power consumption, long transmission distance, anti-interference ability, high speed of air communication.
The remote controller is fashionable and beautiful in appearance, simple and practical in function. With dimming, color temperature, packet synchronization control.
•High light efficacy with constant current solution, High PF, Low HTD.
•Wireless RF-2.4G controller, the distance of controller can reach 20M, Strong anti-interference ability.
•Lightman led ceiling panel light has CE ROHS, FCC, SAA, TUV, UL DLC certifications etc.
2. Product Specification:
Model No |
PL-6060-40W-CCT |
PL-6262-40W-CCT |
PL-3060-36W-CCT |
Power Consumption |
40W/48W/60W |
40W |
36W |
Dimension (mm) |
595*595*10mm |
620*620*10mm |
595*295*10mm |
LED Type |
SMD 2835 |
||
Color Temperature (K) |
Dimmable from 3000K to 6500K |
||
Color |
Warm White/Natural White/Pure White |
||
Beam Angle (degree) |
>120° |
||
Light Efficiency (lm/w) |
>90lm/w |
||
CRI |
>80 |
||
LED Driver |
Constant Current IC Driver |
||
Power Factor |
>0.9 |
||
Input Voltage |
AC85-265V, 50/60HZ |
||
Working Environment |
Indoor |
||
Material of Body |
Aluminum Frame + Mitsubishi LGP + PS Diffuser |
||
IP Rating |
IP20 |
||
Operating Temperature |
-20°~65° |
||
Dimmable Way |
Color temperature and brightness dimmable |
||
Installation Option |
Ceiling Recessed/ Suspended/ Surface/ Wall Mount |
||
Life span |
50,000hours |
||
Warranty |
3Years |
3.LED Panel Light Pictures:
CCT 2.4G Wireless Controller:
1.Within 3 seconds after the lamp is lit up, press the number key "1", then press the "ID" key, then press the number key "1" again and press the "ID" key again as the first time. If the code is matched successfully, then the light will flash one time;
2. If you want to set the second light or second group lights, you can press the number key "2", then press the "ID" key, then press the number key "2" again and press the "ID" key again as the same. This is to set the group number for the corresponding panel lights;
3.When you want to control the number "1" light or number "1" group lights, just press the "1" number key to adjust the brightness or color temperature;
CCT Wall Mounted Dimmable Controller:
On/Off, Dimming and Color-temp adjusting. This panel controller can be installed in the wall. can setup 6 groups led panel light, and each group has no limit for panel light quantity.
Ambient Light Sensor:
Adjust the lamp brightness automatically according to the ambient illumination. Control 1 Group, no limit to the number of lamps in the group within the effective distance. the sound detecting function of the sensor is optional. When there is sound, the sensor will adjust the lamp or will turn off the lamp.
4. Application:
CCT LED Panel Light is widely used for indoor lighting. such as, Office, Hospital, Resistant, Supermarket, Hotel and Grocery lighting etc.
Recessed Installation Project:
Surface Mounted Installation Project:
Suspended Installation Project:
Wall Mounted Installation Project:
Installation Guide:
For led panel light, there are ceiling recessed, surface mounted, suspended installation, wall mounted etc installation ways for options with corresponding installation accessories. Customer can choose according to their requirements.
Suspension Kit:
The suspended mount kit for LED panel allows panels to be suspended for a more elegant look or where there is no traditional T-bar grid ceiling present.
Items included in the Suspended Mount Kit:
Items |
PL-SCK4 |
PL-SCK6 |
||||
3030 |
3060 |
6060 |
6262 |
3012 |
6012 |
|
X 2 |
X 3 |
|||||
X 2 |
X 3 |
|||||
X 2 |
X 3 |
|||||
X 2 |
X 3 |
|||||
X 4 |
X 6 |
Surface Mount Frame Kit:
This surface mount frame is perfect to install Lightman LED panel lights in locations without suspended ceiling grid, such as the plasterboard or concrete ceilings. It is ideal for offices, schools, hospitals etc. where recessed mounting is not possible.
First screw the three frame sides to the ceiling. The LED panel is then slid in. At last complete the installation by screwing the remaining side.
The surface mount frame has enough depth to accommodate the LED driver, which should be placed in the centre of the panel to get good heat dissipation.
Items included in the Surface Mount Frame Kit:
Items |
PL-SMK3030 |
PL-SMK6030 |
PL-SMK6060 |
PL-SMK6262 |
PL-SMK1230 |
PL-SMK1260 |
|
Frame Dimension |
302x305x50 mm |
302x605x50 mm |
602x605x50 mm |
622x625x50mm |
1202x305x50mm |
1202x605x50mm |
|
L302 mm |
L302mm |
L602 mm |
L622mm |
L1202mm |
L1202 mm |
||
L305 mm |
L305 mm |
L605mm |
L625 mm |
L305mm |
L605mm |
||
X 8 pcs |
|||||||
X 4 pcs |
X 6 pcs |
Ceiling Mount Kit:
The ceiling mount kit is specially designed, the other way to install SGSLight TLP LED panel lights in locations without suspended ceiling grid, such as the plasterboard or concrete ceilings or wall. It is ideal for offices, schools, hospitals etc. where recessed mounting is not possible.
First screw the clips to the ceiling / wall, and the corresponding clips to the LED panel. Then couple the clips . At last complete the installation by placing the LED driver at the back of the LED panel.
Items included in the Ceiling Mount Kits:
Items |
PL-SMC4 |
PL-SMC6 |
||||
3030 |
3060 |
6060 |
6262 |
3012 |
6012 |
|
X 4 |
X 6 |
|||||
X 4 |
X 6 |
|||||
X 4 |
X 6 |
|||||
X 4 |
X 6 |
|||||
X 4 |
X 6 |
|||||
X 4 |
X 6 |
|||||
X 4 |
X 6 |
Spring Clips:
The spring clips are used to install the LED panel in the plasterboard ceiling with cut hole. It is ideal for offices, schools, hospitals etc. where recessed mounting is not possible.
First screw the spring clips to the LED panel. The LED panel is then inserted into the cut hole of the ceiling. At last complete the installation by adjusting the position of the LED panel and make sure the installation is firm and safe.
Items included:
Items |
PL-RSC4 |
PL-RSC6 |
||||
3030 |
3060 |
6060 |
6262 |
3012 |
6012 |
|
X 4 |
X 6 |
|||||
X 4 |
X 6 |
Restaurant Lighting (USA)
Hospital Lighting (UK)
Kitchen Lighting (Germany)
Yamaha Shop Lighting (UK)