Products categories
1. Product Features of 2x2ft LED Panel Light 50W.
•Ultra-thin 10mm, using Mitsubishi LGP, super high light efficacy is 100lm/w, save energy up to 70%.
•Edge-lit, no shadow, 6063 aluminum alloy with good heat dissipation.
•With high brightness SMD2835 LEDs, the lumen is 100lm/W .
•100-277VAC Widely input Voltage,0-10VDC Dimming Driver.
•Unique patent design, isolated driver, low constant current drive LEDs to ensure super long lifespan and low light decay.
•Use high brightness high CRI SMD 2835 chip, life span 60,000 hours,5 Years Guarantee.
•The light Angle of 120 degrees ,Big lighting area; Constant high precision Led Driver, no flicker.
•Instant start, no flicker, no noise, no UV, no Lead.
2. Product Specification:
Model No |
PL-2x2-30W-100 |
PL-2x2-30W-125 |
PL-2x2-40W-100 |
PL-2x2-40W-125 |
PL-2x2-50W-100 |
UL/DLC Model |
ET-22-30WD-100 |
ET-22-30WD-125 |
ET-22-40WD-100 |
ET-22-40WD-125 |
ET-22-50WD-100 |
Power Consumption | 30W |
30W |
40W |
40W |
50W |
Dimension (mm) |
603x603x10mm |
||||
LED Type |
SMD2835 |
||||
Color Temperature(K) |
3000K/4000K/5000K/6000K |
||||
Luminous Flux(Lm/w) |
100-125lm/w |
||||
Input Voltage |
AC 100V – 277V, 50 - 60Hz |
||||
Beam Angle (degree) |
>120° |
||||
CRI |
>80 |
||||
Power Factor |
>0.9 |
||||
Working Environment |
Indoor |
||||
Material of Body |
Aluminum Frame+ LGP + PS/PMMA Diffuser |
||||
IP Rating |
IP20 |
||||
Dimmable |
0~10V(UL) |
||||
Operating Temperature |
-20°~65° |
||||
Installation Option |
Ceiling Recessed/ Suspended/ Surface/Wall Mounted |
||||
Life span |
60,000hours |
||||
Warranty |
5Years |
3. LED Panel Light Pictures:
4. LED Panel Light Application:
These slim flat panel LED lights are great for offices, hospitals, schools, museums, galleries, commercial buildings, industrial facilities, conference rooms, reception halls, homes, and more.
Recessed Installation Project:
Surface Mounted Project:
Suspended Installation Project:
Wall Mounted Installation Project:
Installation Guide:
For led panel light, there are ceiling recessed, surface mounted, suspended installation, wall mounted etc installation ways for options with corresponding installation accessories. Customer can choose according to their requirements.
Suspension Kit:
The suspended mount kit for LED panel allows panels to be suspended for a more elegant look or where there is no traditional T-bar grid ceiling present.
Items included in the Suspended Mount Kit:
Items |
PL-HPA4 |
PL-HPA8 |
||||
6060 |
3012 |
6012 |
||||
X 2 |
X 4 |
|||||
X 2 |
X 4 |
|||||
X 2 |
X 4 |
|||||
X 2 |
X 4 |
|||||
X 4 |
X 8 |
Surface Mount Frame Kit:
This surface mount frame is perfect to install Lightman LED panel lights in locations without suspended ceiling grid, such as the plasterboard or concrete ceilings. It is ideal for offices, schools, hospitals etc. where recessed mounting is not possible.
First screw the three frame sides to the ceiling. The LED panel is then slid in. At last complete the installation by screwing the remaining side.
The surface mount frame has enough depth to accommodate the LED driver, which should be placed in the centre of the panel to get good heat dissipation.
Items included in the Surface Mount Frame Kit:
Items |
PL-SMK3030 |
PL-SMK6363 |
PL-SMK1233 |
PL-SMK1263 |
|
Frame Dimension |
310x313x50mm |
610x613x50mm |
1220x313x50mm |
1220x613x50mm |
|
L310 mm |
L610mm |
L1220mm |
L1220mm |
||
L310mm |
L613mm |
L313mm |
L613mm |
||
X 8 pcs |
|||||
X 4 pcs |
X 6 pcs |
Spring Clips:
The spring clips are used to install the LED panel in the plasterboard ceiling with cut hole. It is ideal for offices, schools, hospitals etc. where recessed mounting is not possible.
First screw the spring clips to the LED panel. The LED panel is then inserted into the cut hole of the ceiling. At last complete the installation by adjusting the position of the LED panel and make sure the installation is firm and safe.
Items included:
Items |
PL-CPA4 |
PL-CPA8 |
||||
6060 |
3012 |
6012 |
||||
X 4 |
X 8 |
|||||
X 4 |
X 8 |
Office Lighting(Germany)
Clinic Lighting(UK)