Flexible 48w Suspended RGBW LED Ceiling Panel Light 62x62cm

LED panel lights allow us to create very bright environments thanks to their square, elegant design. There are widely used in many ways. They are most commonly used in offices, businesses, kitchens, hotels, etc… All LED panels come with an aluminum frame to assure they are protected.

Item: 620x620 RGBW LED Panel Light

Power: 48W

Working Voltage: DDC24V

Dimmable: RGBW Dimmable

Lifespan: ≥50000 Hours

Send email to us Download as PDF

Products categories

Product Detail

Installation Guide

Project Case

Product Video

1.Product Introduction of 620x620 RGBW LED Panel Light 48w.

•Special 6063 aluminum frame with 15% better heat dissipation performance than usual aluminum alloy. Designs with LEDs at the back eliminates the need for heavy LGP; designs with LEDs on the sides allows for the panels to be thinner and more compact RGBW panels with state of the art remote control.

•RGBW led panel light fixture use DMX 512 controller or DMX console sub controller, it can achieve color fading, scanning, chasing, playing fish and video etc. DMX signal is in parallel connection, avoiding all lights influenced by the failure of one light in serial connection.

•RGBW led slim panel light adopts high brightness LED chips, SMD 5050 LED, clear and pleasant light beam, bright and non-glare.

•After installation, DMX addresses can be set automatically, solving the trouble of setting DMX address and saving time.

2. Product Parameter:

Model No	PL-6060-45W-RGBW	PL-6262-48W-RGBW	PL-30120-45W-RGBW
Power Consumption	45W	48W	45W
Dimension (mm)	59559511mm	62062011mm	119529511mm
LED Qty (pcs)	196pcs	210pcs	196pcs
LED Type	SMD5050
Color	RGB + White Color
Beam Angle (degree)	>120°
CRI	>80
LED Driver	Constant Voltage LED Driver
Output Voltage	DC24V
Input Voltage	AC 85V - 265V, 50 - 60Hz
Working Environment	Indoor
Material of Body	Aluminum alloy frame and PMMA
IP Rating	IP20
Operating Temperature	-25°~70°
Dimmable Way	RGB Dimmable +White Dimming
Installation Option	Recessed/Suspended/Surface Mounted
Life span	50,000hours
Warranty	3Years

3.LED Panel Light Pictures:

1. Lightman RGB LED Panel Light-Showing Red

2. Lightman RGB LED Panel Light-Showing Green

3.Lightman RGB LED Panel Light-Showing Blue

4. Lightman RGBW LED Panel Light-Showing White

2.4G Infrared RGBW Controller and Remote:

RGBW panel light controller -2.4G Hz Mi-light RGBW controller

•User-friendly control system

•Use 2.4G Hz RGBW control system, anti interference ability

•Without mutual interference between controllers

•It can adjust the brightness and colors in the same time

•20 Types of multiple flashing modes available

•Wireless remote control distance can reach 25-30 meter

•Wireless RF Controller Remote Touch Panel for RGBW

6. DC24V RGB LED Panel Light Wiring Diagram

4. LED Panel Light Application:

This LED panel is the ideal choice if we're looking for great features and minimal consumption. It's widely used in offices, commercial centers, hospitals, warehouses, restaurants, supermarkets, museums, etc., as well as in homes and businesses.

Previous: 45W Color Changing RGBW Dimmable LED Panel Light 60×60

Next: 6000K 60W Surface Mounted RGBW LED Panel Lamp120x60

Installation Guide:

For led panel light, there are ceiling recessed, surface mounted, suspended installation, wall mounted etc installation ways for options with corresponding installation accessories. Customer can choose according to their requirements.

Suspension Kit:

The suspended mount kit for LED panel allows panels to be suspended for a more elegant look or where there is no traditional T-bar grid ceiling present.

Items included in the Suspended Mount Kit:

Items	PL-SCK4				PL-SCK6
	3030	3060	6060	6262	3012	6012
	X 2				X 3
	X 2				X 3
	X 2				X 3
	X 2				X 3
	X 4				X 6

Surface Mount Frame Kit:

This surface mount frame is perfect to install Lightman LED panel lights in locations without suspended ceiling grid, such as the plasterboard or concrete ceilings. It is ideal for offices, schools, hospitals etc. where recessed mounting is not possible.

First screw the three frame sides to the ceiling. The LED panel is then slid in. At last complete the installation by screwing the remaining side.

The surface mount frame has enough depth to accommodate the LED driver, which should be placed in the centre of the panel to get good heat dissipation.

Items included in the Surface Mount Frame Kit:

Items	PL-SMK3030	PL-SMK6030	PL-SMK6060	PL-SMK6262	PL-SMK1230	PL-SMK1260
Frame Dimension	302x305x50 mm	302x605x50 mm	602x605x50 mm	622x625x50mm	1202x305x50mm	1202x605x50mm
Frame A	L302 mm X 2 pcs	L302mm X 2 pcs	L602 mm X 2 pcs	L622mm X 2 pcs	L1202mm X 2 pcs	L1202 mm X 2 pcs
Frame B	L305 mm X 2 pcs	L305 mm X 2 pcs	L605mm X 2 pcs	L625 mm X 2 pcs	L305mm X 2 pcs	L605mm X 2 pcs
	X 8 pcs
	X 4 pcs			X 6 pcs

Ceiling Mount Kit:

The ceiling mount kit is specially designed, the other way to install SGSLight TLP LED panel lights in locations without suspended ceiling grid, such as the plasterboard or concrete ceilings or wall. It is ideal for offices, schools, hospitals etc. where recessed mounting is not possible.

First screw the clips to the ceiling / wall, and the corresponding clips to the LED panel. Then couple the clips . At last complete the installation by placing the LED driver at the back of the LED panel.

Items included in the Ceiling Mount Kits:

Items	PL-SMC4				PL-SMC6
	3030	3060	6060	6262	3012	6012
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6

Spring Clips:

The spring clips are used to install the LED panel in the plasterboard ceiling with cut hole. It is ideal for offices, schools, hospitals etc. where recessed mounting is not possible.

First screw the spring clips to the LED panel. The LED panel is then inserted into the cut hole of the ceiling. At last complete the installation by adjusting the position of the LED panel and make sure the installation is firm and safe.

Items included: