Lightman adopts advanced technology for our led panel light:

1. the thermal conductive adhesive should be as thin as possible, it is best to use the self-adhesive thermal adhesive, otherwise it will affect the thermal conductivity.

2. the choice of diffusing plate, nowadays, many flat-panel lamps on the market generally choose the diffusing plate with smooth surface and matte surface. This diffusing plate has a disadvantage, the static electricity is large, and it is easy to suck in the production process to produce bright spots, and In the long-term use, dust will enter the lamp body through various channels, which will cause the lamps to be densely colored. Lightman uses a double-sided diffusion diffuser. This diffuser has good light guiding effect and low static electricity, which can avoid the bright spots of dust entering the lamp body.

3. LED selection, try to use high-efficiency lamps, because the side-emitting panel lights have limitations in heat dissipation and luminous flux output, power dissipation will have an impact, and low light efficiency.

4. When entering the glossy surface, do not stick glue when sticking the reflective paper. The glue will absorb light, and it is easy to appear on the light surface to produce bright edges. However, a large area of the light guide plate needs to be glued a little, otherwise there will be a shadow strip because the reflective paper is not This is the case when it is tight and loose and warped in the lamp body.