Ultra Thin 120x30cm Dimmable Recessed Surface LED Grid Panel Light 300x1200mm With CE TUV

The 30×120 flat panel lights can be up to 90lm/w, which is equivalent to a 200W incandescent therefore making the light panel incredibly energy efficient generating saving on both your energy bill and allowing you to trim your carbon footprint.

Item: 300x1200 2.4G Dimmable LED Panel Light

Power: 36W /40W /48W /54W /60W /72W /80W

Dimmable: 2.4G Dimmable

Color Temperature: Warm White, Natural White, Cool White

Lifespan: ≥50000 Hours

Send email to us Download as PDF

Products categories

Product Detail

Installation Guide

Product video

1.Product Introduction of 295x1195 2.4G Dimmable LED Panel Light.

•By intelligent remote controller , Unlimited amount of panel lights can be allowed in 4 group and can respectively be turned on/off and dimming, without interfering with each other.

•The intelligent remote dimming LED panel light can dimming, on/off, grouping through 2.4G RF intelligent remote controller, and the number of panel light is unlimited.

•By intelligent remote controller , Unlimited amount of panel lights can be allowed in one group and can be turned on/off and dimming synchronously.

•Lightman 2.4g led surface panel light 30*120 is with SMD 2835 LED chip with high lumen output 80lm/w-100lm per watt. Suitable application for offices, schools and hospitals etc. Beautiful lighting appearance. High brightness lighting solution for direct replacement of T5 luminaire in most indoor applications.

2. Product Parameter:

Model No	PL-30120-36W	PL30120-40W	PL-30120-48W	PL-30120-54W
Power Consumption	36W	40W	48W	54W
Luminous Flux (Lm)	2880～3240lm	3200～3600lm	3840～4320lm	4320～4860lm
LED Qty (pcs)	192pcs	204pcs	252pcs	280pcs
LED Type	SMD 2835
Color Temperature (K)	2800 – 6500K
Color	Warm/Natural/Cool White
Dimension	1195x295x10mm
Beam Angle (degree)	>120°
Light Efficiency (lm/w)	>80lm/w
CRI	>80
Power Factor	>0.95
Input Voltage	AC 85V - 265V
Frequency Range (Hz)	50 - 60Hz
Working Environment	Indoor
Material of Body	Aluminum alloy frame and PS Diffuser
IP Rating	IP20
Operating Temperature	-20°~65°
Dimmable	2.4G Dimmable
Life span	50,000hours
Warranty	3 Years / 5 Years

3.LED Panel Light Pictures:

1. 1200x300 led panel light-natural white

2. 1200x300 LED Panel Light with Suspensiton Kit

4. LED Panel Light Application:

Lightman led ceiling panel light is widely used for residential and commercial suspended grid ceilings, schools, hospitals, gymnasiums, hotels, basement lighting and new construction etc replaces existing fluorescent troffer light fixtures

Recessed Installation Project:

Surface Mounted Installation Project:

9. 30x120 led surface mounted panel light

Suspended Installation Project:

Wall Mounted Installation Project:

Previous: 2.4G Control High Lumen Brightness Dimmable LED Panel Light Fixture 62x62cm

Next: AC85-265V 1200×600 Dimming LED Ceiling Panel Light Fixture

Installation Guide:

For led panel light, there are ceiling recessed, surface mounted, suspended installation, wall mounted etc installation ways for options with corresponding installation accessories. Customer can choose according to their requirements.

Suspension Kit:

The suspended mount kit for LED panel allows panels to be suspended for a more elegant look or where there is no traditional T-bar grid ceiling present.

Items included in the Suspended Mount Kit:

Items	PL-SCK4				PL-SCK6
	3030	3060	6060	6262	3012	6012
	X 2				X 3
	X 2				X 3
	X 2				X 3
	X 2				X 3
	X 4				X 6

Surface Mount Frame Kit:

This surface mount frame is perfect to install Lightman LED panel lights in locations without suspended ceiling grid, such as the plasterboard or concrete ceilings. It is ideal for offices, schools, hospitals etc. where recessed mounting is not possible.

First screw the three frame sides to the ceiling. The LED panel is then slid in. At last complete the installation by screwing the remaining side.

The surface mount frame has enough depth to accommodate the LED driver, which should be placed in the centre of the panel to get good heat dissipation.

Items included in the Surface Mount Frame Kit:

Items	PL-SMK3030	PL-SMK6030	PL-SMK6060	PL-SMK6262	PL-SMK1230	PL-SMK1260
Frame Dimension	302x305x50 mm	302x605x50 mm	602x605x50 mm	622x625x50mm	1202x305x50mm	1202x605x50mm
Frame A	L302 mm X 2 pcs	L302mm X 2 pcs	L602 mm X 2 pcs	L622mm X 2 pcs	L1202mm X 2 pcs	L1202 mm X 2 pcs
Frame B	L305 mm X 2 pcs	L305 mm X 2 pcs	L605mm X 2 pcs	L625 mm X 2 pcs	L305mm X 2 pcs	L605mm X 2 pcs
	X 8 pcs
	X 4 pcs			X 6 pcs

Ceiling Mount Kit:

The ceiling mount kit is specially designed, the other way to install SGSLight TLP LED panel lights in locations without suspended ceiling grid, such as the plasterboard or concrete ceilings or wall. It is ideal for offices, schools, hospitals etc. where recessed mounting is not possible.

First screw the clips to the ceiling / wall, and the corresponding clips to the LED panel. Then couple the clips . At last complete the installation by placing the LED driver at the back of the LED panel.

Items included in the Ceiling Mount Kits:

Items	PL-SMC4				PL-SMC6
	3030	3060	6060	6262	3012	6012
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6

Spring Clips:

The spring clips are used to install the LED panel in the plasterboard ceiling with cut hole. It is ideal for offices, schools, hospitals etc. where recessed mounting is not possible.

First screw the spring clips to the LED panel. The LED panel is then inserted into the cut hole of the ceiling. At last complete the installation by adjusting the position of the LED panel and make sure the installation is firm and safe.

Items included: