Products categories
1.Product Introduction of 295x295 Dimmable LED Ceiling Panel Light.
•Instant start, no flickering, no buzzing, high-efficiency, energy saved up to 70%;
•Special circuit design, each LED work separately, avoiding any problem of lighting output.
•Lightman Dali dimmable led square panel light 300x300 uses light guide plate, it has the feature of uniform and smooth light beam, low glare rating, low light pollution.
•For Dali led ceiling panel light 30*30cm color temperature, there are Warm White (2800-3200K), Natural White (4000-4500K), Pure Whit (6000-6500K).
•Dimmable led flat panel lamp size can be customized according to customer specific requirement.
•Lightman Dali dimming led panel light fixtures 295x295mm have more than50000 hours lifespan.
2. Product Parameter:
Model No |
PL-3030-12W |
PL-3030-18W |
PL-3030-20W |
Power Consumption |
12W |
18W |
20W |
Luminous Flux (Lm) |
960~1080lm |
1440~1620lm |
1600~1800lm |
LED Qty (pcs) |
50pcs |
96pcs |
100pcs |
LED Type |
SMD 2835 |
||
Color Temperature (K) |
2800 - 6500K |
||
Color |
Warm/Natural/Cool White |
||
Dimension |
295x295x11mm |
||
Beam Angle (degree) |
>120° |
||
Light Efficiency (lm/w) |
>80lm/w |
||
CRI |
>80 | ||
Power Factor |
>0.95 |
||
Input Voltage |
AC 85V - 265V |
||
Frequency Range (Hz) |
50 - 60Hz |
||
Working Environment |
Indoor |
||
Material of Body |
Aluminum alloy frame and PS Diffuser |
||
IP Rating |
IP20 |
||
Operating Temperature |
-20°~65° |
||
Dimmable |
Dali dimmable |
||
Life span |
50,000hours |
||
Warranty |
3 Years |
3.LED Panel Light Pictures:
4. LED Panel Light Application:
LED Panel Lights are widely used for offices, schools, hotels, hospitals, shopping malls, kitchen, conference meeting, supermarket, gym, classroom etc.
Recessed Installation Project:
Surface Mounted Installation Project:
Suspended Installation Project:
Wall Mounted Installation Project:
Installation Guide:
For led panel light, there are ceiling recessed, surface mounted, suspended installation, wall mounted etc installation ways for options with corresponding installation accessories. Customer can choose according to their requirements.
Suspension Kit:
The suspended mount kit for LED panel allows panels to be suspended for a more elegant look or where there is no traditional T-bar grid ceiling present.
Items included in the Suspended Mount Kit:
Items |
PL-SCK4 |
PL-SCK6 |
||||
3030 |
3060 |
6060 |
6262 |
3012 |
6012 |
|
X 2 |
X 3 |
|||||
X 2 |
X 3 |
|||||
X 2 |
X 3 |
|||||
X 2 |
X 3 |
|||||
X 4 |
X 6 |
Surface Mount Frame Kit:
This surface mount frame is perfect to install Lightman LED panel lights in locations without suspended ceiling grid, such as the plasterboard or concrete ceilings. It is ideal for offices, schools, hospitals etc. where recessed mounting is not possible.
First screw the three frame sides to the ceiling. The LED panel is then slid in. At last complete the installation by screwing the remaining side.
The surface mount frame has enough depth to accommodate the LED driver, which should be placed in the centre of the panel to get good heat dissipation.
Items included in the Surface Mount Frame Kit:
Items |
PL-SMK3030 |
PL-SMK6030 |
PL-SMK6060 |
PL-SMK6262 |
PL-SMK1230 |
PL-SMK1260 |
|
Frame Dimension |
302x305x50 mm |
302x605x50 mm |
602x605x50 mm |
622x625x50mm |
1202x305x50mm |
1202x605x50mm |
|
L302 mm |
L302mm |
L602 mm |
L622mm |
L1202mm |
L1202 mm |
||
L305 mm |
L305 mm |
L605mm |
L625 mm |
L305mm |
L605mm |
||
X 8 pcs |
|||||||
X 4 pcs |
X 6 pcs |
Ceiling Mount Kit:
The ceiling mount kit is specially designed, the other way to install SGSLight TLP LED panel lights in locations without suspended ceiling grid, such as the plasterboard or concrete ceilings or wall. It is ideal for offices, schools, hospitals etc. where recessed mounting is not possible.
First screw the clips to the ceiling / wall, and the corresponding clips to the LED panel. Then couple the clips . At last complete the installation by placing the LED driver at the back of the LED panel.
Items included in the Ceiling Mount Kits:
Items |
PL-SMC4 |
PL-SMC6 |
||||
3030 |
3060 |
6060 |
6262 |
3012 |
6012 |
|
X 4 |
X 6 |
|||||
X 4 |
X 6 |
|||||
X 4 |
X 6 |
|||||
X 4 |
X 6 |
|||||
X 4 |
X 6 |
|||||
X 4 |
X 6 |
|||||
X 4 |
X 6 |
Spring Clips:
The spring clips are used to install the LED panel in the plasterboard ceiling with cut hole. It is ideal for offices, schools, hospitals etc. where recessed mounting is not possible.
First screw the spring clips to the LED panel. The LED panel is then inserted into the cut hole of the ceiling. At last complete the installation by adjusting the position of the LED panel and make sure the installation is firm and safe.
Items included:
Items |
PL-RSC4 |
PL-RSC6 |
||||
3030 |
3060 |
6060 |
6262 |
3012 |
6012 |
|
X 4 |
X 6 |
|||||
X 4 |
X 6 |
Hospital Lighting (Germany)
Supermarket Lighting (UK)
Room Lighting (Germany)